A single PO3 can retire you 🧪
You need ONLY one PO3
$NQ 5 Seconds Projection = Measuring 30 minutes PO3 Expansion.
Real Time Market Analysis
Clip from a Monster Lab Livestream.
How you can anticipate every phase of Power Of Three (PO3) with Standard Deviations
What can we find in each standard deviation measurement?
PO3 in Depth... 👀
Check this clip,
@TraderDext3r
explains it to you.
4H PO3 Model Video Explanation Tomorrow...
Video available tomorrow at 9:00 AM New York Time On Monster Lab's channel
Don't miss it 🧪😈
Hidden code in the description... 🤫
2 Types of PO3 Openings 🧪
1. Price opening in the middle of expansion (1.0, 1.5 deviations) = Inmediatly continuations
2. Price opening at the end of the expansion (2.0, 2.5 / 4.0 deviations) = Retracement / Reversal
Clip extracted from a livestream (Tuesday, 10/10/23)
It all starts with a Power of Three, any PO3...
Power Of Three + Standard Deviations 🧪
PO3 Elements
Accumulation > Manipulation > Distribution
How to use with Standard Deviations 👇
It all starts with an Opening of ANY PO3 but first, here is what timeframe you should be using to identify each phase of a PO3:
Monthly PO3 - Use 4 Hour TF to identify
Weekly PO3 - Use 1 Hour TF to identify
Daily PO3 - Use 15 Minutes TF to identify
4H PO3 - Use 5m TF To identify
How to anticipate the Weekly PO3?
The first step is to identify where the end of the Manipulation will be.
The second step is to anticipate a FUTURE SMT.
Remember that each start and end of each PO3 PHASE is accompanied by an SMT.
At the end of the Manipulation to switch to
IPDA Data Range 🧪
Building Monsters Volume 1.0
Nueva serie dedicada a todo Habla Hispana
This series is dedicated to all Spanish speakers also all videos will include English subtitles.
I hope you like it 🙏
Inside The 1H PO3
When price take highs or lows, remember in distribution or expansions the target or priority is the highs and lows
If price already taken this highs or lows or external liquidity price, price is now looking for retracements...
What do you think?
Check this
Smart Money Tool "SMT" 🧪
Price divergences 📈📉
How can you find an SMT?
We do not use the SMT for a primary tool, but we use it as a tool to confirm Price's next move.
End of this thread.
We could go into more detail, but the thread would be too long.
This thread was made from a collaborative video by Dexter with TTrades.
You will find framework
#2
and all these concepts more detailed inside the video.
Standard Deviation: Distribution Phase
Distribution = Double manipulation size
During this phase we expect price to Expand in the opposing direction of the Manipulation phase.
In the distribution range we will find different re-accumulation / Re-Distribution areas
1.0, 1.5
Now I will show you a 3-month projection to show you how powerful Risk Management can be.
Initial capital: 10,000 USD
Profit rate: 60%.
Trading days: Tuesday, Thursday, Friday
Trades are 1:2
The Beginning: Opening / Accumulation
Each PO3 has an Opening and at the same time starts the Accumulation Phase.
The opening is the time, while the accumulation is the development of the Price.
This phase is when the market moves, gathering orders without a clear direction.
We are testing new features on our website.
1. You can get automated access to Monster Lab's private server.
How?
Just log in with your Discord account on the website, when you purchase a membership your roles will be updated automatically.
2. We have a support chat on the
PO3 4H Openings: Index Futures & Forex (New York Time)
These concepts are for any timeframe.
But this time we will focus on the 4H Openings for intraday purposes
Within the daily candle, you can find multiple 4H candles
You only need one single candle to make money.
(5/5)
0.5 to 1.5 deviations = Reaccumulation zone
This is where we will find the reaccumulations.
These are retracements to internal liquidity or to sell stops or buystops.
It all depends on the scenario
At the same time, we will confirm these reaccumulations with the SMTs...
Framework
#1
When you identify the opening and the manipulation stage
You can measure the manipulation leg with the STDVs.
In the 2.0 and 2.5 Deviations you can find the last movements and you can find the zone for a retracement or reversal.
Now
What comes after the accumulation?
The Manipulation.
This phase serves to generate orders in the opposite direction since this movement or phase moves in the opposite direction of the Higher Time Frame.
In other words, it is the wick high for the candle in development.
First of all, we have to set a percentage for each trade.
The key is to maintain strict discipline in our operations.
You probably don't like the word discipline, I know.
Don't worry, by this we just mean setting our own limits.
PO3 Phases
Three phases within the development of a candle.
Can be any timeframe
First phase: Accumulation
Second phase: Manipulation
Third Phase: Distribution
Place your stop-loss at a level that makes sense according to your technical analysis.
Never move your stop-loss once the trade is in progress.
Don't rush into trades. Wait for setups that meet your criteria and make sure the 1:2 ratio is achievable before jumping in.
With the same idea
We go down to a lower time frame
And we measure the IPDA Data Ranges of the last 3 days and align them with the ideas of the Higher Time Frame (Weekly PO3 open 2.0 - 2.5 STDV).
Power of Three: Time And Price
When price moves to the manipulation phase, price will be moving to a specific PD Array.
In other words, at a specific price
It can be a Daily FVG, Breaker...
(4/5)
3.0 = Retracement/reversals zone
Here we anticipate the same, when reaching 3.0 deviations, we are interested in the next candle outperform the previous candle
The last bullish candle that we can see was out performed with a candle body.
To confirm this change in price
Inside the PO3 of the 4H candle
We can find the open, wick low, distribution, wick high and the close.
BUT inside this candle in LTF you can find the Internal Dynamics or the price movements.
You can find different types of movements.
Price does not move linear
Each time we see a PO3, it will be accompanied by the previous candle.
If we frame the high and low of the previous candle, we will get a framework for the following movements.
It is one candle at a time, but we have the information from the previous candles.
Now we introduce the standard deviations together with PO3
We use Standard Deviations to measure movements from accumulation to manipulation or from manipulation to distribution.
Types of Development Depending On STDV
Opens within 2- 2.5 Standard Deviations we expect Retracement/Reversals
If opens within 1- 1.5 Standard Deviations we expect Re-Accumulation / Re-Distribution.
The same timeframe or a higher timeframe.
Never lower
Lower when you have the higher timeframe framework and need to re-find these PD Arrays.
But your main PD Array is for the same timeframe or HTF.
Now
Last phase of PO3
The Distribution Phase
The distribution starts when the liquidity of the manipulation is generated these are: Sell Stops, are below the lows.
In other words, they are the stop losses of the orders that were entered in the movement of the manipulation.
Extra (1/2): Knowing what the SMT is, we can start projecting the following movements with the STDVs.
Price arrives at a PD Array HTF, confirms an SMT and this is the moment when we can make these projections of Price's next moves to the opposite PD Array HTF.
At the same time within these internal dynamics
We can find SMTs "Smart Money Tool" that confirm the wick low from the image above
So, we can go into more detail about this
But let's focus on the frameworks so you can work them into your charts.
SMT is a divergence between prices between two pairs or two correlated markets. It can be positively or negatively.
In this example we are talking about a positive correlation.
It could be that the red lines are EUR/USD and the blue lines are GBP/USD or $NQ and S&P500
When arriving at the PD Array HTF we will find
the first fractals on the market that prints here.
As there are many PD Arrays available at all times,
What is the SMT will confirm that it is the beginning and the end of the movement.
Standard Deviation: Accumulation Phase
Use the highest/lowest price leg before the Market
Structure Shift in the opposing direction.
During the Accumulation, the lowest discernible range measured from the low to the high will project the Manipulation.
Note: 2-2.5 Standard
The Devil’s Mark
is a type of Power of Three where a candle opens and starts its expansion without creating a wick.
When this occurs it is highly likely that price will come back to print the wick within the current PO3
Standard Deviation: Manipulation Phase
We anticipate the Manipulation to complete 2-2.5 Standard Deviations
How do I know when this phase has finished?
1. Use HTF POIs within the 2-2.5 STDv
2. SMT Divergence
3. Market Structure Shift
(3/4)
Extra:
If price reaches a HTF PD Array level and at the same time a STDV in retracement or reversal zone, we anticipate that upon reaching those levels, price will print a candle with a larger body than the last printed candle.
Extra (2/2):
But it is VERY important to identify the Opposite PD Array to be addressed and we have to make or find the range that matches the STDVs with the Opposite PD Array HTF.
Any market movement when it starts is going to be in a PD Array HTF and will move with a target to an opposite PD Array HTF.
We will get a movement from a PD Array A to a PD Array B.
Example (2/2)
This would be our framework.
We have our range, and the question you should ask yourself is
Which is more likely to price look for or take, the previous high or the previous low?
Price can only do one of these two things.
Knowing this, once the weekly opens in 2.0 2.5
What do we expect?
Exactly, we are in Retracement / Reversals zone.
Now we expect Retracement / Reversals to the Equilibrium of the current range (Long term).
This applies also in the opposite direction: Buy Stops.
The distribution is for printing the candle body, for the candle in development, or the PO3 in development.
The correlated markets should move "symmetrically" or equally BUT during the Price dynamics at certain specific points such as the PD Arrays HTF, we will find this type of divergence.
Where one of the two markets will do something different
Key Points System 1:2
Once you determine how much to risk, set your entry and exit points.
If you risk $100, your target profit should be $200. This keeps the risk-reward ratio 1:2.